Every production has its curveballs. No matter how much you plan in pre-pro, sets are unpredictable. As grips and electrics, it’s our job to solve problems fast, safely, efficiently, and creatively. The key? Knowing what gear to bring and how to use it in real-world scenarios.
Here are the most frequent headaches on set and how a prepared G&E team tackles them.
1. Tight Locations and Confined Spaces
You show up to a location and realize there’s barely enough room to move, let alone rig lights. Furniture, props, or structural quirks reduce usable space to a few feet.
Solution: Low Profile Gear
Shorter C-stands, compact arms, and small rigging hardware let you work in cramped areas without constantly bumping into walls or ceilings. Lightweight LED panels that can be handheld or mounted in unconventional ways save the day.
Operator tip:
Pre-walk the space with a tape measure and flag any pinch points. Think in layers: lights can often be rigged above, behind, or to the side of objects if you plan for alternative anchor points in advance.
2. Unpredictable or Limited Rigging Options
When shooting on location, you’ll almost never have the ability to rig to anything “ideal.” Sometimes the only options are doors, window sills, columns, or large fixed furniture to use for rigging points.
Solution: Portable Rigging Kits
Overhead stands with menace arm rigs, mini trusses, and various styles of clamps will allow you to create safe attachment points anywhere. Window sills, door frames, bannisters and more can become temporary supports with the right padding and reinforcement.
Operator tip:
Always distribute weight across multiple points. A single clamp on a flimsy surface is a disaster waiting to happen. Redundancy and friction matter as much as creativity.
3. Unreliable Power
Some locations are power nightmares: nonworking outlets, low amperage output, inconsistent voltage readings, open grounds. There are a ton of possibilities where the location’s power can and likely will fall short. Having backup options is key. This is where generator power and battery banks come into play.
Solution: Label Portable Distro Boxes
When running generators, having portable distro boxes, clearly labeled heavy-duty power cables, and extra extension cords is essential. Don’t forget to use adapters for unconventional outlets. Plugs like 240V dryer or RV connections can also be a lifesaver, keeping everything powered safely and efficiently. If traditional power isn’t available, battery-powered units are a reliable alternative. Many LED fixtures can run on DC and include adapters for battery use, which works well for smaller setups. For larger or more power-hungry jobs, bigger battery banks provide a stable AC output from a DC source, allowing you to run everything from hair dryers to 2K fresnels without constantly swapping batteries.
Operator tip:
Bring a simple clamp-on power meter or a multimeter. Testing circuits before you plug in expensive lights prevents blown fuses, gear damage, and frustrating delays.
4. Outdoor or Environmental Challenges
Wind, dust, rain, snow, cloud coverage or direct and extreme sun can ruin a shoot’s plans if you aren’t prepared. Gear falls, lighting shifts, or crew can’t work safely.
Solution: Weights and Clamps
Sandbags, weighted bases, and clamps are essential. Weatherproof lighting units and portable tents for critical gear make a huge difference. Even simple items like Bag-It’s (designed to be re-used and cover working gear and carts), ground spikes and other gear can stabilize setups in high winds or shield sensitive equipment from moisture.
Our favorite practice for tie-downs are “ the claws” used originally for airplane tie-downs. They are three-legged supports that get anchored into the ground with long heavy-duty spikes and allow for a perfect point for tie-downs whether you’re in a front yard or an open field.
Operator tip:
Always identify natural anchors like vehicles, trees, fences, or walls that can help support lights or flags, but be sure to test their resilience, especially when it comes to fences, railings or other similar points. Make a quick risk assessment before starting. Wind gusts can turn a rig into a hazard in seconds.
5. Last-Minute Director Changes
Directors change their minds. Sometimes you have to move lights mid-scene, reposition flags, or improvise new angles all under a tight schedule.
Solution: Flexibility
Flexible, modular setups are key. Lightweight stands, foldable rigs, and portable LED units let you reposition quickly. Having extra clamps and small adapters on hand means you can make micro-adjustments without tearing down the entire setup.
Operator tip:
Think in “swap-ready” modules. Pre-build sections of your rig that can be moved in or out of frame quickly. Being ready for sudden changes keeps the day moving and reduces stress for the entire crew.
On-Set Problems Don’t Scare Experts
Sets are unpredictable. Tight spaces, missing rig points, unreliable power, environmental hazards, and last-minute changes will always show up. The difference between chaos and control is preparation: bringing the right gear, knowing how to adapt, and thinking ahead like a grip or electric operator.
A crew-focused rental house and a mindset of flexibility turn problems into solutions and make you the unsung hero of the day. If you’re looking for G&E help for your next project, contact Big Boy Grip & Lighting today. We rent out one & two-ton grip trucks along with lighting set-ups and crew for your next project.

